Description
AaproMel Hypromellose Eye Drops 0.3% are lubricating artificial tears designed to provide soothing relief from dry, irritated and uncomfortable eyes. Containing hypromellose 0.3% w/v, they help moisturise and lubricate the surface of the eye, providing relief from dryness associated with prolonged screen use, infrequent blinking, air conditioning, central heating, wind, sun and other drying environments. They can also be used to moisturise hard contact lenses and lubricate artificial eyes.
Benefits
- Helps relieve dry and uncomfortable eyes
- Provides soothing lubrication to the eye surface
- Contains Hypromellose 0.3% w/v
- Helps relieve dryness caused by screens and drying environments
- Can moisturise hard contact lenses
- Can lubricate artificial eyes
- Convenient 10ml bottle
Instructions
Wash your hands before use and check that the bottle seal is intact. Tilt your head back and gently pull down the lower eyelid. Apply 1–2 drops into each affected eye up to 4 times daily, or as directed by your doctor or pharmacist. Blink several times after application and replace the cap securely. If using other eye medicines, leave an appropriate interval between applications.
Warnings
For use in the eyes only. Do not use if you are allergic to hypromellose or any of the ingredients. Remove soft contact lenses before use and wait at least 15 minutes before replacing them, as the product contains benzalkonium chloride. Do not touch the dropper tip against the eye or any other surface. Temporary stinging or blurred vision may occur after application; do not drive or operate machinery until vision has returned to normal. Do not use in case of an eye infection, injury or corneal abrasion. If irritation persists or worsens, or you experience eye pain, changes in vision or continuous redness, stop using the drops and seek medical advice. Discard the bottle 30 days after opening and store below 25°C. Keep out of the sight and reach of children.
Ingredients
Active ingredient: Hypromellose 0.3% w/v.
Other ingredients: Sodium chloride, potassium chloride, borax, boric acid, benzalkonium chloride and water for injection.




